Menu
Back

HC2-ROPCB-F

OEM modules for customers specific solutions with the latest airchip technology.

Key features
• Adjusted OEM module for humidity and temperature
• Highest possible measuring accuracy
• Range of application: -50…100 °C / 0…100 %RH
• Calculates dew/frost point
• Two freely scalable analog outputs
• Digital UART interface
• Available with or without sensor frame
• Customized versions on request

Weight 2g
Range of application -50…100 °C / 0…100 %RH, non-condensing
Accuracy at 23 ±5 °C ±0.8 %rh / ±0.1 K
Power supply +3.2...5.5 VDC / Recommended power supply 3.3 VDC - If a different power supply is used, the module must be readjusted
Current consumption 4.5 mA at 3.3 VDC
Long-term stability Better than 1 %RH / year
Humidity sensor ROTRONIC HYGROMER® IN-1
Temperature sensor PT100 1/3 DIN Class B
Response time t 63 <15 sec.
Psychrometric calculations Dew and frost point
Initialisation time Typically <3 sec.
Firmware update Via HW4 software
Type of output signals Analog / Digital
Circuit type 3/4 wire
Housing No housing
Cable connections Solder flats
FDA / GAMP FDA 21 CFR part 11 / GAMP5
Adjustment At 10, 35 and 80 %RH @ 23 °C
Supported software protocols RO-ASCII, MODBUS*, I2C*
Evaluation software / Compatibility ROTRONIC HW4**
Logging function 2000 data records. In loop or start-stop mode (function can be switched on with HW4 ** software)
Temperature adjustment 2 points with HW4**
Humidity adjustment Up to 100 points with HW4**
Output signals 2x 0...1 VDC analog / 1x digital UART
Analog output 1 0...1 VDC / 0...100 %RH
Analog output 2 0...1 VDC / -40...60 °C
Load per analog output V-signal: ≥1 kΩ/V
Digital interface options UART / (Ethernet, RS-485, USB optionally via accessories)
Polarity protection No
Standards EN 61000-6-4 & EN61000-6-2