Menu
Back

HygroClip XD - Standard probe

Versatile HygroClip2 - Standard probe

Features
• Measures relative humidity & temperature
• Calculates dew/frost point
• Power supply range: 5…16 VAC / 5…24 VDC
• Outputs: 0…1V / 0…5 V / 0…10 V / 0…20 mA / 4…20 mA
• Voltage outputs configurable via software
• Highest precision and reproducibility
• Excellent long-term stability <1 %RH / year
• Digital interface for calibration and measurement processing

Dimensions 135 mm, ∅ 15 mm
Operating range -40..85 °C / 0…100 %rF
Range of application -40…85 °C (-40…185 °F) / 0…100 %RH
Accuracy at 23 ±5 °C ±0.8 %rh / ±0.2 K
Power supply / Power consumption 5…16 VAC / 5…24 VDC
Current consumption 7 mA (typical) @ 24 VDC, 0…10 V / 12 mA (typical) @ 5 VDC, 0…1 V
Long-term stability <1 %rh / year
Humidity sensor ROTRONIC HYGROMER® IN-1
Temperature sensor PT100 1/3 DIN Class B
Probe protection Polycarbonate plastic cage
Filter cartridge Polyethylene dust filter, gray, 20 um
Maximum wind velocity 20 m/s, with polyethylene filter
Response time t 63 <15 sec.
Psychrometric calculations Dew and frost point
Probe adjustment by software Single point, multipoint, dew point (%RH / °C), with service cable
Analog output signal (standard) 0…1 / 5 / 10 V
Digital output signal (standard) UART or RS-485
Max. probe cable length 2 m / 5 m
Housing Polycarbonate
IP protection rating IP65
FDA / GAMP FDA 21 CFR part 11 / GAMP5
CE / EMC conform 2007 / 108 / EG
Maintenance Annual calibration recommended