Digital Interface Adapters
| Tip: refresh this page for up-to-date product and price data |
| Digital interface adapters for the HygroClip 2 probes | |||
|
AC3001  |
$210.00 |
UART to USB Connects HC2 probe directly to the USB port of a PC running the HW4 software Cable electronics convert UART interface to USB. Probe is powered by USB port of PC. |
|
|
E2-05XX-MOD  |
$225.00 |
UART to RS-485 or MODBUS Female connector (black) for the HC2 probe with 5m (16.4 ft) cable - 4 wires with tinned ends. Cable electronics convert UART interface to RS-485 or to MODBUS, depending on the communications protocol used by the probe (can be set with the HW4 software). Supply voltage to cable: 5 to 28 VDC Supply voltage to probe: 3.3 VDC Current consumption with probe: 10 mA |
|
AC3005 |
$540.00 |
UART to Ethernet Connects the HC2 probe to an Ethernet network. Power supply options:
|
|
AC1207 |
$58.00 |
Power adapter 100-240VAC / 9 VDC/ 200mA fits US and European receptacles |
|
| Digital interface adapters for the legacy HygroClip probes |
|
HygroClip DI-3  |
$400.00 |
DIO to USB and RS-485 Connects up to two HygroClip probes (models with 5-pin DAT05 connector only) to the USB port of a PC and also provides an RS-485 port. Requires the HW4 software and AC adapter mod. AC1211 115 VAC / 12 VDC. |
|
|
HygroClip DI-4  |
$595.00 |
DIO to Ethernet and RS-485 Connects up to two HygroClip probes (models with 5-pin DAT05 connector only) to an Ethernet network and also provides an RS-485 port. Requires the HW4 software and AC adapter mod. AC1211 115 VAC / 12 VDC. |
|
|
HygroClip DI-4-WL  |
$1,045.00 |
DIO to wireless Ethernet and RS-485 Connects up to two HygroClip probes (models with 5-pin DAT05 connector only) to a wireless Ethernet network and also provides an RS-485 port. Requires the HW4 software and AC adapter mod. AC1211 115 VAC / 12 VDC. |
|
|
AC1211 |
$50.00 |
Power adapter 100-240VAC / 12 VDC/ 200mA fits US and European receptacles |
