|
|
Home Page | HygroLab 2 - HW4 Set
| Operation |
 |
| Efficient and Simple to Use: | |
|
1) Select the measuring mode on
the PC: AwQuick (accelerated) or AwE (conventional) |
|
|
2) Place a product sample inside
the sample |
 |
|
3) Start measuring a probe by
clicking with the mouse on the corresponding box in the input column. A
check mark appears in the box, indicating that the measurement has begun. Several probes can be measured at the same time. |
|
 |
|
| 4) When the measurement is ended (in typically 5 minutes), the results appear on a green background. |
 |
|
5) Click with the mouse on "Generate Report" to
capture the results to a text file such as the one below. This file is protected by an authentication stamp and is automatically archived to the PC. |
 |
| 6) Click with the mouse on "File" (menu bar) and select "Sign Document" |
 |
| 7) Enter your password (for identification purposes) and a description of the samples that have just been measured |
 |
| 8) Click on "Sign". The following text lines are added to the file and the file is ready to be printed. |
 |
|
9)
Click with the mouse on the input box corresponding to each probe
that has just been measured . The check mark disappears indicating that the probe is ready for the next measurement. |