Accessories

Home Page | HygroLab 2 - HW4 Set | Back to Probes

Probe Accessories

Sample holders and disposable cups
for use with the AW-DIO probe

WP14 sample holder (shallow)

WP40 sample holder (deep): for chunky products

PS14: pk of 100 disposable cups for use with the WP14 holder

PS40: pk of 100 disposable cups for use with the WP40 holder

Note: all of the above is included in the HygroLab 3 set

AW-KHS sealing clamp
for use with the AW-DIO probe

For long term measurements, the AW-KHS sealing clamp is required to prevent external conditions from influencing the sample.
Compatible with all models of sample holder.

Humidity standards
for use with all probes

The ROTRONIC certified humidity standards provide a reference value against which probes can be calibrated. They are supplied in packs of five, complete with a certificate. With the AW-DIO probe, place the humidity standard in a sample cup, inside the sample holder. For other probes, a calibration device is required.
EAxx, where xx = 0, 5, 10, 20, 35, 50, 65, 80 or 95 %RH

The EA35 and EA80 are included in the HygroPalm AW1 set.

Calibration devices
These are small containers that hold the humidity standard and provide a sealed environment after being fit tightly on the tip of the probe.

EGL: for HP28 probe
ER-05: for SC05 probe
EGS: for HS28 probe

	Sample holders and disposable cups for use with the AW-DIO probe WP14 sample holder (shallow) WP40 sample holder (deep): for chunky products PS14: pk of 100 disposable cups for use with the WP14 holder PS40: pk of 100 disposable cups for use with the WP40 holder Note: all of the above is included in the HygroLab 3 set
	AW-KHS sealing clamp for use with the AW-DIO probe For long term measurements, the AW-KHS sealing clamp is required to prevent external conditions from influencing the sample. Compatible with all models of sample holder.
	Humidity standards for use with all probes The ROTRONIC certified humidity standards provide a reference value against which probes can be calibrated. They are supplied in packs of five, complete with a certificate. With the AW-DIO probe, place the humidity standard in a sample cup, inside the sample holder. For other probes, a calibration device is required. EAxx, where xx = 0, 5, 10, 20, 35, 50, 65, 80 or 95 %RH The EA35 and EA80 are included in the HygroPalm AW1 set.
	Calibration devices These are small containers that hold the humidity standard and provide a sealed environment after being fit tightly on the tip of the probe. EGL: for HP28 probe ER-05: for SC05 probe EGS: for HS28 probe