HygroLog NT - Humidity Temperature Probes

Home Page | HygroLog NT Main Page

HygroLog NT
Probe Options

Portable Probes (Handheld)

HygroClip S (internal or external probe for HygroLog NT2 / NT3)
for measurement in air, max. 85慢 (185慚), wire mesh filter
length: 100mm (3.9"), d: 15mm (0.6")

HygroClip SP05
for measurement in air ducts, max. 85慢 (185慚)
tube length: 200mm (7.9"), d: 5mm (0.2")
cable: 2m (6.5ft)

HygroClip SC05
for measurement in tight spaces, max. 100慢 (212慚)
diameter: 5mm (0.2"), cable: 2m (6.5ft)

HygroClip HK25 / HK40
air probe for measurement at high temperature
HK25: max. 150慢 (212慚) / HK40: max. 200慢 (392慚)
wire mesh filter
tube length: HK25: 250 (9.8") / HK40: 400mm (15.7"), d: 15mm (0.6")
cable: 2m (6.5ft)

HygroClip HP28 insertion probe
for measurement of materials in bulk, max. 85慢 (185慚)
sintered steel filter
tube length: 280 (11"), d: 10mm (0.4")
cable: 2m (6.5ft)

HygroClip HS28 sword probe
for measurement of paper stacks/rolls, max. 85慢 (185慚)
blade length: 280 (11"), w: 18mm (0.7"), th.: 4mm (0.16")
cable: 2m (6.5ft)

Note: the above probes have a 5-pin DAT-05 connector. Extension cable MOK-02-DAT05 can be used to connect any of the above probes to input 1 of the HygroLog NT2 / NT3 (this input is normally used for an internal HygroClip S probe). Adapter cable MOK-02-B5 is required to connect any of the above probes to inputs 2 and 3 the HygroLog NT3 or to inputs 4 to 7 of the docking station (see Accessories).

Fixed Installed Probes

HygroClip IC-1 (100mm) / IC-3 (250mm)
for through wall installation, PPS body, wire mesh filter
-50...200慢 (-58...392慚)
body: length: 100/250mm (3.9/9.8"), d: 15mm (0.6")
cable: 2m (6.5ft)

HygroClip IM-1 (120mm) / IM-3 (270mm)
recommended for high humidity, high temperature applications
for through wall installation, stainless steel body, wire mesh filter
-50...200慢 (-50 ...392慚)
body: length: 120/270mm (4.7/10.6"), d: 15mm (0.6")
cable: 2m (6.5ft)

HygroClip IE-1 (G1/2 ") / IE-3 (NPT1/2 ")
for pressurized applications max. 50 bar (725 PSI)
sintered stainless steel filter
applications at ambient temperature, survives -50...85慢 (-58...185慚)
cable: 2m (6.5ft)

Note: the above probes have a 7-pin connector. An adapter cable such as the T7-03-B5 is required for connection to inputs 2 and 3 the HygroLog NT3 or to inputs 4 to 7 of the docking station (see Accessories). Extension cable mod. AC1616 is not compatible with the HygroLog NT.

Portable Probes (Handheld)
	HygroClip S (internal or external probe for HygroLog NT2 / NT3) for measurement in air, max. 85慢 (185慚), wire mesh filter length: 100mm (3.9"), d: 15mm (0.6")
	HygroClip SP05 for measurement in air ducts, max. 85慢 (185慚) tube length: 200mm (7.9"), d: 5mm (0.2") cable: 2m (6.5ft)
	HygroClip SC05 for measurement in tight spaces, max. 100慢 (212慚) diameter: 5mm (0.2"), cable: 2m (6.5ft)
	HygroClip HK25 / HK40 air probe for measurement at high temperature HK25: max. 150慢 (212慚) / HK40: max. 200慢 (392慚) wire mesh filter tube length: HK25: 250 (9.8") / HK40: 400mm (15.7"), d: 15mm (0.6") cable: 2m (6.5ft)
	HygroClip HP28 insertion probe for measurement of materials in bulk, max. 85慢 (185慚) sintered steel filter tube length: 280 (11"), d: 10mm (0.4") cable: 2m (6.5ft)
	HygroClip HS28 sword probe for measurement of paper stacks/rolls, max. 85慢 (185慚) blade length: 280 (11"), w: 18mm (0.7"), th.: 4mm (0.16") cable: 2m (6.5ft)

Note: the above probes have a 5-pin DAT-05 connector. Extension cable MOK-02-DAT05 can be used to connect any of the above probes to input 1 of the HygroLog NT2 / NT3 (this input is normally used for an internal HygroClip S probe). Adapter cable MOK-02-B5 is required to connect any of the above probes to inputs 2 and 3 the HygroLog NT3 or to inputs 4 to 7 of the docking station (see Accessories).
Fixed Installed Probes
		HygroClip IC-1 (100mm) / IC-3 (250mm) for through wall installation, PPS body, wire mesh filter -50...200慢 (-58...392慚) body: length: 100/250mm (3.9/9.8"), d: 15mm (0.6") cable: 2m (6.5ft)
		HygroClip IM-1 (120mm) / IM-3 (270mm) recommended for high humidity, high temperature applications for through wall installation, stainless steel body, wire mesh filter -50...200慢 (-50 ...392慚) body: length: 120/270mm (4.7/10.6"), d: 15mm (0.6") cable: 2m (6.5ft)
		HygroClip IE-1 (G1/2 ") / IE-3 (NPT1/2 ") for pressurized applications max. 50 bar (725 PSI) sintered stainless steel filter applications at ambient temperature, survives -50...85慢 (-58...185慚) cable: 2m (6.5ft)
Note: the above probes have a 7-pin connector. An adapter cable such as the T7-03-B5 is required for connection to inputs 2 and 3 the HygroLog NT3 or to inputs 4 to 7 of the docking station (see Accessories). Extension cable mod. AC1616 is not compatible with the HygroLog NT.