 |
 |
Back
to HygroClip S3
HygroClip S3 Humidity Temperature Probe
| Technical data | |
| Humidity sensor | ROTRONIC Hygromer® C94 (capacitive) |
| Temperature sensor | RTD Pt100 Ohm, 1/3 DIN |
| Sensor protection | Wire mesh filter (standard) / foam filter (optional) |
| Measuring range | 0...100%RH and -40...85°C ( -40...185°F) |
| Operating limits | same as measuring range |
| Accuracy at 23°C / 73°F | ±1.5%RH and ±0.2°C / 0.4°F (when calibrated for HygroFlex M) |
| Repeatability | better than 0.5%RH and 0.1°C/°F |
| Analog
output
signals (minimum load > 10 k Ohm) |
0...100%RH
= 0...1V - 40...85°C = 0...1.25V (-40...60°C = 0...1V) |
| Digital output/input signal | 1-wire, HygroClip format, 2-way communication |
| Analog signal resolution | 0.02%RH and 0.06°C |
| Digital signal resolution | 0.004%RH and 0.004°C |
| Sampling time | < 0.7 sec |
| Maximum cable length | 5
m /15 ft for direct output up to 100m / 325 ft with signal amplifier |
| Connection type | bayonet cap on mounting connector (see accessories) |
| Protection grade | IP65 (probe to connector) |
| Supply Voltage | 3.5...50VDC |
| Current Consumption | < 4mA |
| Minimum excitation time | < 4 sec |
| EMC compatibility (CE) | EN-50081-2, EN50082-2 |
| Material | Polycarbonate, white |
| Dimensions | length: 100mm (3.94"), diameter: 15mm (0.59") |
| Weight | 14 g / 0.5 oz |