Home Page | HygroFlex M

HygroFlex M Models
Both versions of the HygroFlex M share these features: • Interchangeable HygroClip S3 probe with 3 meter (9.8 ft) cable • Fully user programmable • Software based probe calibration and instrument configuration • Internal test connector for HygroPalm calibrator • 12...35 VDC / 12...24 VAC or 90...264 VAC power
HygroFlex M1 : - %RH and temperature -  Analog Outputs	HygroFlex M3:   - %RH, temperature and calculated value    (dew-point, enthalpy, etc) -  Analog & Serial Outputs
• Two linear analog outputs: 4-20 mA, 0-5V, etc. • Jumper configuration of analog outputs signal type • Analog outputs can be configured for practically any   range	• Three linear analog outputs: 4-20 mA, 0-5V, etc. • Jumper configuration of analog outputs signal type • Analog outputs can be configured for practically any range • RS-232 and RS-485 output (optional cable grip) • Networkable - see below   RS232 first HygroFlex to PC   RS485 between transmitters • Optional input for analog pressure probe (restrictions apply)   (optional cable grip) Maximum network cable length: RS-232: 150m (490ft) RS-485: 1,000m (3,300ft) between the two furthermost units