Back to MPH Main Page

MPH Series Humidity Temperature Meteorological Probe

Technical data		MP100H (voltage outputs)	MP400H (current outputs)
Configurations	Separate temperature probe with active linear output signal (standard) Separate temperature probe with direct 2-, 3- or 4-wire RTD connection (optional) No separate temperature probe - temperature output provided by RTD from HygroClip (optional)
Humidity Temperature Plug-in Probe	HygroClip S3 (included with MPH)
	Humidity sensor: ROTRONIC Hygromer® C94 (capacitive)
	Temperature sensor: RTD Pt100 Ohm, 1/3 DIN
	Sensor protection: Wire mesh filter (standard)                             Foam filter (optional)
Separate Temperature Probe	Stainless steel rod 118 x 3 mm (4.64 x 0.12")
	Pt100 1/3 DIN RTD (standard) Pt100 1/5 DIN RTD (optional) Pt100 1/10 DIN RTD (optional)
Operating/Measuring range	0...100%RH -40...60°C / -40...140°F
Accuracy at 23°C / 73°F	<±1.5%RH and ±0.2°C (valid for active outputs)
Repeatability	better than 0.5%RH and 0.1°C
Measuring ranges (active outputs)	0...1V = 0...100%RH			4...20mA = 0...100%RH
	0...1V = -40...60°C (standard) 0...1V = -30...70°C (optional) -0.4...0.6V = -40...60°C (optional)			4...20mA = -40...60°C (standard) 4...20mA = -30...70°C (optional)
Active Outputs Load	> 1000 Ohm			< 500 Ohm
Supply Voltage	3.6...35VDC, 10 mA			5VDC + 0.02 x load, 45 mA max. 15VDC maximum
Cable Length Compensation	effective for up to 100m/300ft			N/A (current outputs)
Connecting Cable	standard: 3m (9ft) PUR cable with tinned ends
Weight	210 g / 0.47 lb