 |
 |
Home Page
| M2
Series Main Page
M2 Series Humidity Temperature Transmitter
| Accessories | ||
| MOK-XX-DAT05 | Extension
cable for M22 / M23 wall mount (remote probe) XX= 02 (2m / 6ft) or 05 (5m / 15ft) 
|
|
| HygroPalm 3 |
 |
Field calibrator |
| ACRLXB5 | Cable:
service connector M22 / M23 to HygroPalm 3 for field calibration
(probe connected to transmitter) and loop validation.
|
|
| ACML232 | Configuration
cable for the M23 only, connects the service connector to the COM port
of a PC. Both the scale of the M23 output signals and the temperature
unit can be changed when the HW3 software is installed on the PC.
|
|
| MOK-02-WIN | Calibration
cable for the HygroClip S probe (when the probe is removed from the
transmitter) - supplied with 9-pin COM port adapter
|
|
| HW3 | Calibration / configuration software on CD ROM | |
| HygroClip Sxx/yy | HygroClip S probe simulator where xx = relative humidity in %RH and yy = temperature in °C (fixed values) | |
| HygroClip R | Fully
calibrated, refurbished HygroClip S (HygroClip Exchange Program) |
|
| ER-15 |
 |
Calibration device for HygroClip S |
| EAXX-SCS |
 |
Certified
humidity standards (5 per box) XX = 00, 05, 10, 20, 35, 50, 65, 80, 95%RH |